Product code: 602
Copper metallic finish paint
Single-pack hydrocarbon resin metallic paste topcoat for LPG cylinders, exhausts and fabricated steel—decorative metallic UV/heat resistance (~125–170 °C stated).
- - High opacity and coverage
- - Metallic lustre
- - Fast drying
- - Directional reflection; UV-stable
- - Long service life
- Transport and storage: In unopened packs at room temperature the product can be stored for at least 2 years. Protect from excessive heat. Carry by the handle and stack neatly on the packaging. Signal word: Danger. Hazard statements: H22
- Safety warnings: P101 If medical advice is needed keep the container or label.
- Technical note 1: Handling and storage information: In unopened packs at room temperature can be stored for at least 2 years. Protect from excessive heat. Carry by the handle and stack neatly on the packaging
- Technical note 2: must be stacked neatly. Signal word: Danger. Hazard statements: H226 Flammable liquid and vapour. H304 Fatal if swallowed or enters airways. Precautionary statements: P101 If medical advice is needed keep the container or label
Degrease and derust; blast preferred else wire brush; mix thoroughly; direct-to-steel application per system guidance; two coats recommended.
Ambient 5–35 °C; metal ≥ambient +4 °C. Spray, brush or dip. Ready to use; ≤5% industrial thinner if needed. Drying at 20 °C / 50–60% RH: touch 3–5 min, dust-free 10–15 min, hard 20–25 min. Coverage ~15–25 m²/L — flash point >25 °C stated.
No questions have been added for this product yet.
